What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 06:17
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Here is a simplified AC power diagram.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then asserts :
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But it can get overloaded, and no longer works.
Netanyahu says ‘we’ll do what we need to do’ with Iran’s leader - Financial Times
These are simplified answers to the original question, and does not change anything I wrote above.
A fuse is a non-resetable over current circuit protector.
Upvotes:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but I think this circuit , shows a few more pieces.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
a photo is worth a thousand words.
Algorithm to analyze smartphone app data can predict MS symptoms - Multiple Sclerosis News Today
the problem then depends on "how fast does the fuse operate?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The other is “what does a “fuse” do?”
What's the cause of under eye dark circles and what treatments can help?
This is 'the assistant's answer'
There are two important concepts here.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Do guys ever want to suck a dick even though they are straight?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Edit 2024–10.
What is your craziest/worst Halloween story?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
First Sentence:
‘Cheers’ star George Wendt’s cause of death confirmed - New York Daily News
eight
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(Dc diagram shown, AC is similar).
One
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–14 [Omar Gharbi Omar Gharbi ]
One is “what exactly is in a ‘surge protector’ ? ”
What does a fuse do?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
An AC voltage/ current source, and an ac inductive load.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Because the load is inductive, the current lags the voltage.(by a bit).
It also is a device that limits the change in current flow.
[image of Common-mode choke]
This one hit behind the barn.
A circuit breaker is similar, but is resettable.
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
It seems Mohan does not understand the difference between a comment and an Answer.
These devices are installed between the “hot” and “neutral” and protective ground.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This device then solves the entire problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At one ohm, the resistor has a maximum of 1 watt power.
so, what happens?
Now when you have a certain ac resistance, then a current flows in a loop.
I post the exact comment here.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are three different concepts here that are getting confused.
The third is lightning and “how it gets conducted into a home.”
What is lightning?
In schematic diagrams this is the symbol for a fuse:
The bolt then partially travels down the line to your home.
The MOV will conduct when the voltage exceeds 50% of line voltage.
At least they know the answer if they wanted it.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
what exactly is a ‘surge’ protector?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where the MOV conducts again, and dissipated the energy.
He then describes the function of a fuse.
but this device (an Inductor) … impedes the rapid changes in the current.
[old diagram got deleted by accident]
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.